How to Safely Clean Battery Corrosion

December 17, 2019 11:54 pm Published by Leave your thoughts

Whenever you’re dealing with equipment that relies on batteries to function, it’s important to periodically check those batteries for corrosion. If you pop open the battery cover only to discover there is some corrosion occurring, you do not necessarily need to panic—there are some steps you can employ to clean the battery corrosion before the equipment becomes inoperable.

With this in mind, here are some tips for safe battery corrosion removal in Houston, TX.

Collect all necessary cleaning tools

Before you begin cleaning your corroded battery, you’ll first need to gather up all the supplies that will be used in the process. It is crucial that you wear gloves and eye protection to prevent any corrosion or chemicals from getting on your skin or in your eyes. You’ll also need an old toothbrush for scrubbing the battery (cotton swabs may also be acceptable, although they might not work as well), baking soda and a natural acid like vinegar or lemon juice.

Clean the electronic drive

Remove the battery or batteries from the case and recycle them properly. Once you’ve removed the battery, you must clean the corrosion off of the device it was being used to power. Use the cotton swabs or toothbrush dipped in the natural acid, which will help to dissolve the corrosion. Scrubbing with the toothbrush or swab helps to remove as much of the corrosion as possible.

Any residue left behind after you’ve done this can be removed with baking soda and a small amount of water, which you can once again scrub away with the toothbrush or cotton swab. Wipe away any leftover substances that remain, and allow the device to completely dry before you install a new battery. The process really is that simple.

If the damage to the device was severe and irreparable due to extreme levels of corrosion, you will likely need to replace the item. Depending on the warranty and the manufacturer, you may be able to get the item replaced or repaired at no cost.

Take preventative measures

As the saying goes, an ounce of prevention is worth a pound of cure. If you take care of your batteries, you can reduce your likelihood of needing to scrub away corrosion.

If you plan to store a device for a long period of time, remove the batteries first, so you don’t have to worry about the device potentially getting damaged by battery leaks. If there is an AC adaptor, remove the batteries while the device is plugged in, because they’re not needed at that time.

Never store batteries in areas that are subject to extreme temperature swings. Regardless of what you’ve heard, storing batteries in the refrigerator does not prolong their life—rather, it could actually shorten battery life and cause leaks to develop. Whenever placing batteries in a device, make sure you put in matching batteries that are new and made by the same brand.

For more information about safe battery corrosion removal in Houston, TX, contact Texford Battery Co. today.

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *