Oil Filtration InsightsAugust 15, 2019 1:28 am Leave your thoughts
Oil doesn’t wear out. That is, even when you filter out contaminants like carbon, dirt and gasoline, it is still oil underneath. The molecular structure is the same. So why do we have to change the oil in our cars and machinery from time to time? The answer is that the contaminants it collects over time contribute to wear. It is important to use a good filtration system—by removing the particulate matter before it can wear on your machine, you are extending the life of your components significantly.
Here’s a quick overview about why oil filtration systems in Houston, TX can prolong the lifespan of your equipment:
- Oil has four main purposes: The oil in your machinery is designed to perform four major functions. It cleans the system by guiding particulates to the filter, cools the machine parts it comes in contact with, seals to keep fluids in and air or dirt out and lubricates the moving parts. The more contaminated your oil is, however, the harder it will be for it to perform any of those duties.
- Particulates in the oil cause wear: If your machine’s oil is full of contaminants, anything it touches is subject to wear. It doesn’t even have to be large particulates—even the ones as small as one micron can cause damage to valve lifters. For example, earth-moving equipment and automobiles can develop carbon inside the oil sump. When that’s mixed with water condensed into the oil by the hot engine, it forms an acid that eats away the inside of the engine. This can cause or contribute to early engine failure. Similarly, hydraulic systems and cutting or coolant fluids can fail or develop harmful bacteria and/or acids.
- Filters help remove contaminants: The solution to removing particulates is a filter, of course. No matter what type of equipment you are using, the key to efficiency is protecting your components while removing contaminants. Good oil filtration in Houston, TX will prolong the lifespan of your equipment in terms of years, and in turn save you time and money.
- Not all filters are created equally: Choosing the right filter for your machine will have a great impact on its efficiency. There are two major types of filter systems: full-flow and partial-flow systems. Full-flow filters are good for catching particles 20 to 40 microns in size. They filter a large volume of fluid at once, making them unsuitable for catching tiny particles. In contrast, partial-flow filters operate with small streams of liquid on a loop, and can catch particulate matter as small as one micron. As mentioned earlier, even particles as small as one micron can cause serious damage over time.
Do you have questions about oil filtration systems in Houston, TX? Texford Battery Co. can help. We proudly offer Harvard Corporation Constant Contamination Control Systems, proven to filter out particles as small as one micron. We can help you select or install filter housings, elements or carts. Visit or call us today for more information!
Categorised in: Oil Filtration Systems
This post was written by Writer