Common Equipment Battery Issues

Why does my equipment not start? Some batteries may have corrosion and oxidation. That means their terminals will not make a strong enough connection to start the big diesel engines found in most earth-moving or industrial equipment. Maybe your car is also experiencing a similar problem. These terminals will generate heat when used to start equipment and can even melt the terminal because of heat. Here are additional battery issues that could affect your equipment.

1. Bad Battery Post

A bad battery post is a common issue that can lead to several problems. For one, it creates a high resistance connection. Second, if the post is too short, it will not make good contact with the terminal. This will also generate heat and cause the terminal to melt. The solution is to clean the post and ensure it is the correct size. Also, make sure the terminal is the right size for the post.

2. Faulty Battery Cables

Faulty battery cables are another common issue. This can mostly be caused by multiple factors, such as loose connections, bad insulation, or corroded cables. The solution is to check the connections and make sure they are tight. Also, check the insulation for any cracks or holes. If the cables are corroded, you will need to replace them. In this case, it is best to consult a professional.

3. Faulty Battery Terminal

Loose battery terminals are another common issue. Loose battery terminals are caused by several factors, such as loose connections, bad insulation, or corroded cables. The solution is to check the connections and make sure they are tight. Also, check the insulation for any cracks or holes. Finally, it is common for the terminal to become loose over time. In this case, you will need to replace the terminal.

4. Dirty Battery Connections

Dirty battery connections are another common issue. This can be caused by several factors, such as loose connections, bad insulation, or corroded cables. The solution is to check the connections and make sure they are clean. Also, check the insulation for any cracks or holes. Finally, it is common for the connections to become dirty over time. In this case, you will need to clean the connections.

5. Deep Cycling

In diesel batteries, “deep cycling” means that the battery is regularly discharged below 80 percent. This can happen if the equipment is frequently turned off and on or if the battery is used to power accessories such as lights or a radio. Deep cycling can damage the battery and shorten its lifespan. The solution is to avoid deep cycling by turning off the equipment when it is not in use and using a separate battery to power accessories.

6. Overcharging and Undercharging

You might have a perception that overcharging your battery is a welcome undertaking. However, overcharging can damage the battery and shorten its lifespan. The solution is to avoid overcharging by using a charger that has an automatic shut-off feature. Also, you need to prevent undercharging, which can also damage the battery. The solution is to charge the battery regularly, even if it does not appear to be low.

Conclusion

Batteries have many moving parts and are susceptible to a variety of issues. This article has discussed some of the most common battery issues. By understanding these issues, you can help extend the life of your battery and avoid costly repairs. Reach out to Texford Battery Co if you have questions about your battery system.

Categorised in: Battery Repair

This post was written by admin