Archives

Charging Criteria and Other Differences Between Flooded, AGM and Gel Batteries

May 24, 2018 6:39 pm Published by Leave your thoughts

Three of the most common styles of batteries you’ll find for equipment today are flooded, absorbed glass mat (AGM) and gel batteries. But what exactly are the differences between these three common battery types, and what do you need to know about them when determining which is the right choice for your specific application? Here’s some information to consider from a battery store in Houston, TX. Flooded batteries These are the most “traditional” type of battery for most applications. They contain a combination of liquid electrolytes, with the liquid amount needing to be carefully measured and maintained for proper performance... View Article

Limiting Ash and Water In Mechanical Systems Can Reduce Corrosion

May 9, 2018 4:34 pm Published by Leave your thoughts

Corrosion in internal engine systems is most commonly caused by a buildup of contaminants inside the oil. While the oil itself does not go bad over time, poor filtration can cause these contaminants to slowly build up and require the oil to be changed. Therefore, limiting the presence of these contaminants, such as ash and water, can help reduce corrosion and extend the life of the oil in your engine. Here is some information from a battery store in Houston, TX about limiting those types of contaminants. Using Harvard™ brand filters to reduce corrosion, contaminants At Texford Battery Co., we... View Article